详细介绍
JC Anti-rust Emulsified Oil
Product number:M1010 M1011 M1012
product description:
JC anti-rust emulsified oil is based on the deep refined mineral oil and add a variety of functional additives refined. It is suitable for the cooling and lubrication of the machining process of black metal in mechanical processing industry, such as turning-lathing, grinding, drilling, milling, drawing and so on, and can meet the requirements of rust prevention between the processing procedures.
characteristics:
Excellent extreme pressure, lubrication and cooling performance can significantly improve the surface finish and reduce tool wear.
The product is non-toxic, no pungent odor, no damage to human skin, easy to use, safe operation.
Do not cause the machine tool paint bubble, craze, fall off and so on bad influence.
The product has good storage stability and long service life.
Recommended use:
It is suitable for lathing, drilling, milling and other black metal processing technology. Usage concentration: 3-8%, mean dilute the product according to the 3-8% ratio with water and use it.
玖城牌防锈乳化油典型数据:Typical data of JC anti-rust emulsified oil:
项目Project |
典型数据Typical data |
|
外观(15~35℃) Appearance(15~35℃) |
棕色至浅褐色液体 Brown to light brown liquid |
|
PH值PH value |
7.5-8.5 |
|
消泡性ml/10min Defoaming ml/10min |
≤2 |
|
腐蚀试验(55℃±2℃) Corrosion test(55℃±2℃) |
钢片Steel sheet |
≥24h |
铜片Copper sheet |
≥6h |
|
铝片Aluminum sheet |
≥4h |
|
防锈试验(35±2RH95%h)一级灰口铁 Anti-rust test(35±2RH95%h)First grade gray iron |
单片Monolithic |
≥48h |
叠片Lamination |
≥8h |
|
安定性(15~35℃) Stability(15~35℃) |
皂Soap |
≥0.5 |
油Oil |
无Nothing |
|
对机床油漆的适应性Adaptability to machine tool paint |
合格Pass |
玖城牌防锈乳化油
产品型号:M1010 M1011 M1012
产品描述:玖城牌防锈乳化油是以深度精制矿物油为基础油,加入多种功能添加剂调合而成,适用于机械加工行业黑色金属的车、磨、钻、铣、拉等加工过程的冷却和润滑,并能够满足加工工序间的防锈要求。
产品特点:
优异的极压、润滑、冷却性能,对提高工件表面光洁度和减少刀具磨损效果显著。
产品无毒、无刺激性气味,不损害人体皮肤,使用方便,操作安全。
不会引起机床油漆气泡、开裂、脱落等不良影响。
产品贮藏安定性好,使用寿命长。
产品应用:
适用于机械加工行业的车、钻、铣等黑色金属加工工艺。使用浓度:3-8%,即将本品按3-8%的比例用水稀释即可使用。