详细介绍
JC High Temperature Anti-seize Grease
Product number:SV2501 SV2502 SV2503
product description:JC High temperature anti-seize grease, Thickening of high temperature synthetic oil with inorganic thickening agent.Add ultrafine pure copper powder and antiseptic, rust-proof and other additives refined.
Performance characteristics:
Excellent high temperature resistance against sticking, sintering and sealing.
Excellent extreme pressure and abrasion resistance. The friction coefficient is the same as that of the oil coated bolt.
Good corrosion resistance, stable torque after repeated dismantling and tightening.
Long term high temperature or extremely high temperature conditions, effectively prevent parts from clamping and welding.
Recommended use:
It is used to prevent various bolt threads from sticking and sintering with other components under high temperature conditions.
Used for lubrication and stripping between grinding tools and workpieces in the foundry industry.
It is used for parts which are allowed to use solid powder lubrication at extremely high temperature.
Temperature range:-35℃ to 1200℃
玖城牌防卡高温润滑脂的典型数据:Typical data of JC High temperature anti-seize grease:
项目Project |
典型数据Typical data |
外观 Appearance |
黑色光滑均匀油膏 |
工作锥入度/0.1mm 60次 Penetration 1/10mm 60 times |
220--265 |
滴点,℃ Drop point,℃ |
350 |
铜片腐蚀(T2.100℃.24h) Copper corrosion(T2.100℃.24h) |
合格PASS |
水淋流失量(79℃,1h)% Sprinkling loss(79℃,1h)% |
1 |
钢网分油(100℃,24h)% Steel mesh oil filtering(100℃,24h)% |
1 |
防腐蚀性(52℃,48h) Corrosion resistance(52℃,48h) |
合格 PASS |
极压性能(四球机法)Pa/kg Extreme pressure performance (4-ball test)Pa/kg |
650 |
抗磨性能(四球机法)(40kg,60min)/mm Antiwear performance (4-ball test)(40kg,60min)/mm |
0.45 |
EMCOR防锈实验,10%合成海水 EMCOR antirust experiment, 10% synthetic sea water |
0.0(无锈) (No rust) |
适用工作温度℃ Applicable working temperature ℃ |
-35--+1200 |
玖城牌防卡高温润滑脂
产品型号:SV2501 SV2502 SV2503
产品描述:玖城牌防卡高温润滑脂采用无机稠化剂稠化耐高温合成油,添加超微粒纯铜粉末以及防腐、防锈等添加剂精制而成。
产品特点:
极佳的高温防粘、防烧结性和螺纹密封性。
优异的极压抗磨性能,摩擦系数与涂油螺栓相同。
良好的耐腐蚀性,经反复拆卸、拧紧仍具有稳定的扭矩。
长期高温或极高温度条件下,有效防止部件卡死和焊接。
产品应用:
用于防止各种螺栓丝扣在高温工况下粘连和烧结的部件。
用于铸造行业磨具与加工件之间的润滑和脱模。
用于极高温工况下允许使用固体粉末润滑的部件。
使用温度:-35℃~1200℃